We are constantly making updates to our parts. Because of this, we recently gave a much needed update to our Mini-14 clip spoons and Mini-30 magazine loaders. These parts now function with older magazines as well as the new magazines. Typically older magazines include a square welded tab at the back of the magazine.
Gen II parts will be manufactured with our own internal production capacity from ABS plastic. All our engineering and testing show that this is the right move forward for a stronger, cheaper, and shorter lead time part. Take a look at the images below.
Many times when I see the idea of stripper clip loading proposed, usually someone quickly asks “but why?”
For a lot of people, the sight of stripper clip loading is self explanatory. If this is you, feel free to read no further. For other people, they look at stripper clips as an inferior and out dated loading method. In all honesty, they are correct. It’s slower and more finicky than changing a magazine. People take that correct view and go one step farther and think something that is inferior and out dated doesn’t have a place. That’s where I disagree.
Reason 1) Stripper clips prove their worth as a supplementary loading method. They don’t replace magazines, they supplement magazines. There is generally a finite number of magazines in any given situation. Proprietary Mini-14 and Mini-30 magazines cost significant amounts of money. On the other hand, stripper clips flood the market at a nearly disposable price. The average shooter can afford to buy stripper clips for most of the ammo they have on hand. Some ammo is even sold prepackaged on stripper clips giving the shooter a steady supply of loaded clips. When the loaded magazines run out, the shooter can reload magazines using pre-loaded stripper clips. The U.S. military still employs this method, although they issue a magzine filler (or colloquially a loading spoon) to load the magazines directly. These “spoons” are available for the Mini-14 and I encourage their use. Keep in mind no such product exists for the Mini-30(until now). I don’t see a good reason why someone should complain about stripper clip guides attached to a rifle but not the little spoons currently still issued to U.S military personnel for resupply. It’s the same thought process for both.
Reason 2) Shooting with outdated technology is more fun than you’d think. I point to the continued popularity of lever actions, revolvers, and black powder for proof. When you can envision what it was like for a Vietcong soldier using a Chinese made Type 56 SKS against the French in a jungle, it enriches the shooting community with some history. I think we can all embrace a little novelty into shooting. Not every item in your safe needs to be for the protection of your life. There are a lot of people not interested in shooting for fun, but that’s okay. If that’s you, no problem, but it’s also okay to let others have our fun. Keep in mind, it has never been recommended by us that you use a stripper clip to reload your rifle while being shot at, unless that’s your only means of reloading.
Reason 3) Gadgety things captivate me and make my soul hum. I know others feel the same deep pull. I’m fascinated by adapting things together that normally have no business together. (See Other post) There is no foreseeable end for the tinkering with my rifles. I need to re-zero my rifle on every range visit because I’ve changed so much that I can’t trust the zero anymore. It’s a real problem, but it’s not one that will stop in the near future. Let us tinker. Sooner or later we’ll come up with something you really like. There are things in the works that we think more people will like, so keep that in mind.
Reason 4) Gun laws and legal restrictions determine new sets of requirements for others. I commonly hear “just move” like it’s a simple concept to leave family and friend networks. Our products weren’t specifically built for this purpose, but I absolutely understand the demand for more loading options in several restrictive U.S. states. Going back to the first point, ten round magazine restrictions or fixed magazine restrictions accentuate the cost benefits of stripper clip loading. In the long term, Garand style Enbloc clip loading should take the place of stripper clip loading. It’s a better overall system for fixed magazines.
If you still aren’t convinced, that’s ok. Take a look at our other products and see if there is anything else you’re interested in. Feel free to share what you think.
P.S. I’d like to leave a big thanks to The Truth About Guns for featuring our blog post and products in their article!
This is a guide to help you choose the correct parts for the rifle you own.
For the 582, 583, and 584 rifles with the drilled and taped receiver, the choice is an obvious one. Get the part that mounts with the factory supplied screws and don’t worry about it. The side mount parts will work, but if you need to access the ejector/bolt hold open, you will need to disassemble the clip guide first. Found here.
For rifles with serial numbers 581 and below with integral Ruger scope mounts; I have a clip guide that attaches to the side plate (bolt hold open/ejector cover) and it contours to the integral Ruger scope mounts. Found here
(It would be possible to use a 582+ part on these rifles but you would need to drill and tap the receiver with #5-40 holes in the correct locations. The hard steel of the receiver makes this a difficult process and should be left to people with the necessary skills to do this)
If you do not have the integral Ruger scope mounts, you can use our “Pre-Ranch” model of clip guide found here. Mini-30’s were never made in this variety. These models didn’t have the pesky ejector getting in the way, so you can load these perfectly vertical.
If you have a 180 series rifle, I have no practical way to add a clip guide. This shouldn’t really come as shock, but I have no plans for developing one. There isn’t a good way to do it and the relatively small number of rifles makes this not very feasible.